Specifications
| Max. load | 300 N |
|---|---|
| Torque | 30 Nm |
| Weight | 300 g |
| Communication | Modbus RTU / data stream (RS-485) |
Description
The Robotiq FT 300 is a 6-axis force torque sensor that gives a collaborative robot a sense of feel. This allows the robot to perform precise force-sensitive tasks such as part insertion, assembly, finishing and product testing. It mounts directly on the robot flange and is installed without custom wiring.
The sensor has a measuring range of +/-300 N for force and +/-30 Nm for torque, with 500% overload capacity, a data output rate of 100 Hz in data stream mode and a mass of 300 g. The signal is digital over RS-485 (Modbus RTU or data stream), so it is not affected by ambient noise. It uses a rigid metal construction and wear-free sensing technology.
For Universal Robots it comes with the Force Copilot software, which provides tool weight compensation, zeroing of the sensor value, hand guiding, alignment, insertion and constant-force functions without programming.
Typical applications
- Part insertion and assembly
- Sanding and finishing with constant force
- Product testing and hand guiding
Compatible with
- Universal Robots
- Robotiq Sanding Kit