Specifications
| Max. load | 200 / 200 N |
|---|---|
| Torque | 10 / 6.5 Nm |
| Resolution | 0.2 / 0.8 N, 0.01 / 0.002 Nm |
| Weight | 0.347 kg |
| IP rating | IP67 |
| Voltage | 7-24 V |
| Power | 0.8 W |
| Dimensions (H x W x L) | 50 x 71 x 93 mm |
| Operating temperature | 0 to 55 °C |
Description
The OnRobot HEX-E QC is a 6-axis force/torque sensor that measures force and torque along Fx, Fy, Fz, Tx, Ty and Tz. It gives the robot force feedback for contact-based work, and the HEX software supports force-control setup, path recording and contact detection.
HEX-E is the high-sensitivity variant of the HEX family. Its nominal capacity is 200 N in the force axes, 10 Nm around X and Y and 6.5 Nm around Z, with a noise-free resolution of 0.2 N (Fxy) and 0.8 N (Fz). OnRobot recommends the HEX-E where higher sensitivity is needed, for example in force-control applications such as sanding and pin insertion. For a heavier payload or a longer tool, OnRobot recommends the HEX-H QC instead.
The QC version is the HEX sensor for use with the OnRobot Quick Changer. It is supplied with a mounting adapter plate, a 5 m M12 cable, mounting screws and a Torx key. The sensor is rated IP67, weighs 0.347 kg including adapter plates and runs on 7 to 24 V. It is a different product from the HEX-E with CAN-EtherCAT converter, which is sold separately.
Typical applications
- Sanding, polishing and deburring with force control
- Pin insertion and precision assembly
- Part detection and force monitoring
Compatible with
- ABB
- Denso
- DOBOT
- Doosan Robotics
- ELITE
- Epson
- FANUC
- Hanwha
- JAKA
- Kassow
- Kawasaki
- KUKA
- NACHi
- Omron TM / Techman
- Schneider Electric
- Standard Bots
- Universal Robots
- Yaskawa