Specifications
| Max. load | 200 / 200 N |
|---|---|
| Torque | 20 / 13 Nm |
| Resolution | 0.5 / 1 N, 0.036 / 0.008 Nm |
| Weight | 0.35 kg |
| IP rating | IP67 |
| Voltage | 7-24 V |
| Power | 0.8 W |
| Dimensions (H x W x L) | 50 x 71 x 93 mm |
| Operating temperature | 0 to 55 °C |
Description
The OnRobot HEX-H QC is a 6-axis force/torque sensor that measures force and torque along Fx, Fy, Fz, Tx, Ty and Tz. It is intended for force-controlled work with a heavier payload or a longer tool, where the torques around the sensor are larger.
HEX-H is the higher-torque variant of the HEX family. Its nominal capacity is 200 N in the force axes, 20 Nm around X and Y and 13 Nm around Z, so its torque capacity is twice that of the HEX-E QC. The trade-off is resolution: the noise-free resolution is 0.5 N (Fxy), 1 N (Fz), 0.036 Nm (Txy) and 0.008 Nm (Tz). OnRobot recommends the HEX-E QC where higher sensitivity is needed and the HEX-H QC where higher payload or tool length is needed.
The QC version is the HEX sensor for use with the OnRobot Quick Changer. It is supplied with a mounting adapter plate, a 5 m M12 cable, mounting screws and a Torx key. The sensor is rated IP67, weighs 0.35 kg including adapter plates and runs on 7 to 24 V. It is a different product from the HEX-H with CAN-EtherCAT converter, which is sold separately.
Typical applications
- Force control with heavier tools or longer tool offsets
- Sanding, polishing and deburring with larger torque loads
- Part detection and force monitoring
Compatible with
- ABB
- Denso
- DOBOT
- Doosan Robotics
- ELITE
- Epson
- FANUC
- Hanwha
- JAKA
- Kassow
- Kawasaki
- KUKA
- NACHi
- Omron TM / Techman
- Schneider Electric
- Standard Bots
- Universal Robots
- Yaskawa