OnRobot HEX-H QC

Specifications

Max. load 200 / 200 N
Torque 20 / 13 Nm
Resolution 0.5 / 1 N, 0.036 / 0.008 Nm
Weight 0.35 kg
IP rating IP67
Voltage 7-24 V
Power 0.8 W
Dimensions (H x W x L) 50 x 71 x 93 mm
Operating temperature 0 to 55 °C

Description

The OnRobot HEX-H QC is a 6-axis force/torque sensor that measures force and torque along Fx, Fy, Fz, Tx, Ty and Tz. It is intended for force-controlled work with a heavier payload or a longer tool, where the torques around the sensor are larger.

HEX-H is the higher-torque variant of the HEX family. Its nominal capacity is 200 N in the force axes, 20 Nm around X and Y and 13 Nm around Z, so its torque capacity is twice that of the HEX-E QC. The trade-off is resolution: the noise-free resolution is 0.5 N (Fxy), 1 N (Fz), 0.036 Nm (Txy) and 0.008 Nm (Tz). OnRobot recommends the HEX-E QC where higher sensitivity is needed and the HEX-H QC where higher payload or tool length is needed.

The QC version is the HEX sensor for use with the OnRobot Quick Changer. It is supplied with a mounting adapter plate, a 5 m M12 cable, mounting screws and a Torx key. The sensor is rated IP67, weighs 0.35 kg including adapter plates and runs on 7 to 24 V. It is a different product from the HEX-H with CAN-EtherCAT converter, which is sold separately.

Typical applications

  • Force control with heavier tools or longer tool offsets
  • Sanding, polishing and deburring with larger torque loads
  • Part detection and force monitoring

Compatible with

  • ABB
  • Denso
  • DOBOT
  • Doosan Robotics
  • ELITE
  • Epson
  • FANUC
  • Hanwha
  • JAKA
  • Kassow
  • Kawasaki
  • KUKA
  • NACHi
  • Omron TM / Techman
  • Schneider Electric
  • Standard Bots
  • Universal Robots
  • Yaskawa

Downloads